There’s something disheartening about a dirty bike. You cringe at the creaks and grinds, avert your eyes from the grime, and roll out for a ride with shame that you haven’t maintained the machine that brings you so much joy. Good news: you’re just 5 steps away from breathing new life into your bike and riding with pride again!
Set the stage before you begin. Make sure your bike is stable, the hose is ready, and all your cleaning supplies are close by. You can use a clean, soft rag to wrap your seat post in if you’re putting it in a work stand – it minimizes the risk of scratching your dropper post.
Never use high pressure! A backyard water hose is best and you definitely want to steer clear of the car wash. That high pressure forces water into your seals and bearings where it will wreak havoc and cost you money later. While it may be satisfying to erase dirt with that strong blaster, it’s much better for your components to take it easy. Use your thumb to flick the bigger chunks of mud off, you don’t want that grit and gravel in your brushes where it can scratch something later.
Use a quality bike-specific degreaser to clean your drivetrain. Dedicate a brush to this part of the bike and make sure you get all that grime off your derailleur’s pulley wheels and the cassette. Don’t forget to clean around your chainring, cranks, and suspension linkage, too. I’m a big fan of the chain scrubbers – they help prolong the life of your chain and drivetrain components.
3. Cleaning Time
Before you ever touch the bike with a brush, rinse it out thoroughly. Particles can get in those bristles and really scratch things up. Use a quality soap and clean brush to scrub the bike down. I start with my suspension components and controls, then move on to my frame, saving the wheels for last. Rinse your brush out often because the dirt you’re scrubbing off the bike is going into that brush, so clean it out! Try using a smaller detailing brush to get into those hard to reach spots.
4. Rinse & Inspect
Rinse everything thoroughly and check for any missed spots or stubborn dirt. Check for frayed cables, bent pedal pins, loose bolts, and make sure everything looks to be in good working order. Inspect your bike often to make the necessary repairs – it may save your next ride from being a dud!
5. The Finishing Touches
Use a clean, soft towel to dry everything off. Water is the enemy, so take your time, dry around all the seals and bounce the bike a few times to shake out any lingering drops.
For an added bonus, try some of the great bike detailing supplies that are available. It is absolutely crucial that you keep your brake rotors covered if you use any sprays or waxes – any contamination of those brake parts will cause major issues.
My favorite detailing sprays are a water dispersing lubricant that I use for the drivetrain and a silicone-based spray that really makes the bike shine. Not only does it bring out the bling, it protects the finishes of the frame and suspension helping everything operate smoothly and repels dirt or mud on future rides. Finally, lube your chain and wipe away the excess.
Congratulations, your bike looks as close to new as it ever will! A clean bike feels fantastic with everything moving freely and silently (like a ninja!). Now that your bike is looking fresh, it’s time to gear up in your favorite kit, hit the trails, and ride it with pride.
G2 Bike looks forward to many more of these clinics in this area.
Ninja Mountain Bike Skills is a warm and friendly environment to learn new skills and hone ones you already know....
Ninja Mountain Bike Skills is a warm and friendly environment to learn new skills and hone ones you already know. It's a non intimidating environment where mistakes are welcomed so corrections can be made. I own G2 Bike is Aliso Viejo and this clinic has been ran out of the Aliso Woods area and when I interviewed the clients they had all but great things to say. None arrogant instructors and easy to follow steps. The biggest bang for many was meeting new area riders at their skill level, gaining confidence, and getting the bike set up and fit properly. G2 Bike looks forward to many more of these clinics in this area. Thanks Richard for all you do for the MTB community! ~ AJ S.
I’m so glad I made the decision to be part of the Mulberry Gap 3-day clinic.
I'm so glad I made the decision to be part of the Mulberry Gap 3-day clinic. Richard and Randy are...
I'm so glad I made the decision to be part of the Mulberry Gap 3-day clinic. Richard and Randy are really skilled at breaking things down, very patient and kind. They were very attentive to what each of us needed individually while maintaining a no-pressure, fun vibe. The place is beautiful, rustic and offers a great opportunity to unplug. It's the seemingly little things that make a big difference in your riding, and I feel like I gained some useful insight about not only being on the bike, but set-up and nutrition as well. ~Susan Tully
Highly recommended! Essential riding skills are thoroughly broken down making them easy to understand and learn. Coach Richard and Kris...
Highly recommended! Essential riding skills are thoroughly broken down making them easy to understand and learn. Coach Richard and Kris are some of the most professional and pleasant coaches/cyclist/people I have come across. Looking forward to one of their future clinics. ~ Tom T.
We are a group of passionate, dirt-loving, community oriented, world class mountain bike skills instructors committed to helping you reach your personal riding goals through clinics and camps. We are excited to work with riders of all ability levels and share the joy (STOKE) of mountain biking.